The Apeks XTX200 is the flagship of the Apeks regulator range. A cold-water rated, fully balanced primary regulator with environmental seal.
The FSR first stage uses a balanced diaphragm design for high performance and air flow at any depth and cylinder pressure. Air is supplied via four low pressure and two high pressure ports configured in easy hose routing positions. Cold water protection is provided by using a dry environmental seal to prevent ice crystal forming on the main spring and critical components that could lead to a free flow. The seal also provides contamination and chemical damage protection for soft material parts such as o-rings and the diaphragm.
The Apeks XTX200 second stage features an inlet heat exchanger combined with a full metal valve body to improved cold disipation. Venturi control is provided via a lever on the side of the housing to control air flow within the second stage. Inhalation resistance can also be adjusted by using the external control knob to increase the resistance required to open the valve if needed by the diver.
The Apeks XTX200 is also supplied with interchangeable exhaust covers, giving the option of a compact and streamlined cover or a wide deflecting cover that pushes exhaled gas away from the front of the face.
The first and second stages are joined by a braided black low pressure hose. Braided hoses provide extra protection and safety by increasing UV resistance and significantly increasing the burst pressure of the hose compared to traditional rubber hoses. Braided hoses are also lighter and more flexible.
- Balanced diaphragm design first stage
- Environmentally sealed first stage
- Four low pressure ports
- Two high pressure ports
- Braided low pressure hose
- Inlet heat exchanger
- Balanced second stage
- Venturi control
- External inhalation adjuster
- Anti-bacterial mouthpiece
- Interchangeable exhaust covers